Still a CB600 only a designer style
To add spice to the already popular CB-6000 we are coming up with a new look in the Designer Line. Our first introduction will be the "Wood Finish". No two products are identical in design. Each one has its own special look! Order Now!
The Innovative ring design consists of three interlocking pieces that fit together like puzzle pieces. The two guide pins hold the top pieces together. The locking pin goes through the middle recessed hole connecting the cage portion to the ring. The new flat design is extremely comfortable. The rings come in 5 sizes: 1 ½”, 1 5/8”, 1 ¾”, 1 7/8” and 2.0” inside diameter. The cage length is 3 ¼” with an I.D. of 1 3/8”.
Polycarbonate material is used due to its light weight and durability. The cage portion has the vented slots for hygiene and also allows for natural air drying. The bottom opening allows for use at the urinals. You may want to have a piece of tissue handy to wipe any drips.
Make sure to wear a numbered plastic lock if going through any metal detectors. It has been reported that some men have worn the brass padlock and have not had any ‘alarming’ experiences, however, the plastic lock is still recommended.
We highly recommend using a silicone based lubricant after showering. This allows the penis to naturally move up and down in the cage portion. After a break in time period you should be able to wear it for 24/7 for an indefinite period of time…1 month, 3 months…wearer and Keyholder ultimately determine the length of time.
Each Order includes the following:
1.One Cage Portion
2.Five different sized rings
3.Four locking pins
5.One brass padlock with TWO keys
6.Five individually numbered plastic locks
7.An embossed CB-6000™ zipper pouch
Lubricate the head and shaft of penis with a silicon based gel or lotion prior to wearing any of the devices. Do yourself a favor and always put the product on while in a ‘Relaxed State’.
RINGS: When wearing the CB-2000 rings, pull a little skin through the ring and then insert one ball at a time. Push the penis through the ring. When wearing the CB-3000 and Curve rings, open the bottom swivel and put them around the ball sack and penis. The CB-3000 and Curve rings are interchangeable. When wearing the CB-6000 ring, take the bottom portion of the ring and put it around the ball sack and penis. Insert the top ring with the guide pins. While putting on the other top half make sure to push the penis in
a down position while attaching these two pieces. The CB-6000 parts are not interchangeable with other products.
LOCKING PINS: Insert the locking pin in the recessed side of the rings.
SPACERS: Various sized spacers are provided with the CB-2000, CB-3000 and Curve so you can find the most comfortable fit. The small spacer goes behind the lock and in front of the ring. The spacers with CB-6000 are designed in such a way that each spacer fits a particular locking pin.
CAGE: Insert the penis into the cage. Push the penis down in order to avoid pinching when connecting the cage to the ring.
POINTS OF INTRIGUE: The CB-2000, CB-3000 and Curve Points of Intrigue come in three different lengths. The points for the CB-3000 and Curve are interchangeable. The long edge goes towards the ring. They fit on the locking pin between the cage and ring.
BRASS PADLOCK: After assembling the ring, guide pins, locking pin and spacers to the cage, attach the brass padlock. The CB-6000 only comes with one key. Make sure to have a diligent Keyholder!
CLEANING PRODUCT: Use a mild soap and soft type brush (toothbrush) for cleaning. Do Not use household cleaning products.
NOTE: Always take the time to smooth any loose skin around the rings and cage for the most comfortable fit.
Note: All prices in US Dollars