Consists of 3 interlocking pieces that fit together like puzzle pieces. Two guide pins hold the top pieces together. Locking pin goes through the middle recessed hole connecting the cage portion to the ring. Design is extremely comfortable. Rings come in 5 sizes: 1-1/2", 1-5/8", 1-3/4", 1-7/8" and 2." inside diameter. Cage length is 3-1/4" with I.D. of 1-3/8".
Polycarbonate material used due to its lightweight and durability. Cage portion has vented sots for hygiene, also allowing for natural air drying. Bottom opening allows for use at urinals. (You may want to have a piece of tissue handy to wipe any drips.) Make sure to wear a numbered plastic lock if going through any metal detectors. Though there've been no reports or alarming experiences about the brass padlock, plastic lock is advised. Use silicone based lubricant after showering, to allow penis to naturally move up and down cage portion.
This item includes the following:
One Cage Portion
Five different sized rings
Four locking pins
One brass padlock with ONE key
Five individually numbered plasctic
Lubricate the head and shaft of penis with a silicon based gel or lotion prior to wearing any of the devices. Do yourself a favor and always put the product on while in a ‘Relaxed State’.
RINGS: When wearing the CB-2000 rings, pull a little skin through the ring and then insert one ball at a time. Push the penis through the ring. When wearing the CB-3000 and Curve rings, open the bottom swivel and put them around the ball sack and penis. The CB-3000 and Curve rings are interchangeable. When wearing the CB-6000 ring, take the bottom portion of the ring and put it around the ball sack and penis. Insert the top ring with the guide pins. While putting on the other top half make sure to push the penis in
a down position while attaching these two pieces. The CB-6000 parts are not interchangeable with other products.
LOCKING PINS: Insert the locking pin in the recessed side of the rings.
SPACERS: Various sized spacers are provided with the CB-2000, CB-3000 and Curve so you can find the most comfortable fit. The small spacer goes behind the lock and in front of the ring. The spacers with CB-6000 are designed in such a way that each spacer fits a particular locking pin.
CAGE: Insert the penis into the cage. Push the penis down in order to avoid pinching when connecting the cage to the ring.
POINTS OF INTRIGUE: The CB-2000, CB-3000 and Curve Points of Intrigue come in three different lengths. The points for the CB-3000 and Curve are interchangeable. The long edge goes towards the ring. They fit on the locking pin between the cage and ring.
BRASS PADLOCK: After assembling the ring, guide pins, locking pin and spacers to the cage, attach the brass padlock. The CB-6000 only comes with one key. Make sure to have a diligent Keyholder!
CLEANING PRODUCT: Use a mild soap and soft type brush (toothbrush) for cleaning. Do Not use household cleaning products.
NOTE: Always take the time to smooth any loose skin around the rings and cage for the most comfortable fit.
Note: All prices in US Dollars